Rapid Prototyping for Titanium Grade 5 (Ti-6Al-4V)
Rapid prototyping in titanium Grade 5 is essential for aerospace and medical projects where material-specific testing cannot substitute with alternatives.
권장 가공 매개변수
| 매개변수 | 값 |
|---|---|
| 달성 가능 공차 | ±0.02 mm (prototype standard) |
| 표면 조도 | Ra 1.6-3.2 μm |
| 절삭 속도 | 30-60 m/min |
| 이송 속도 | 0.08-0.15 mm/tooth |
| 공구 추천 | Specialized titanium tooling. |
전문가 가공 팁
1
Allow 5-7 day lead time minimum
2
Expect 3-5x cost premium over aluminum
3
Design to minimize material waste (expensive stock)
4
Combine multiple parts per setup when possible
일반 가공 부품
Medical implant prototypes
Aerospace test articles
Motorsport validation parts
가공 과제
- Very expensive material and machining
- Long lead times
- Specialized tooling needed