CNC Milling for Titanium Grade 5 (Ti-6Al-4V)

Milling Ti-6Al-4V is one of the most challenging CNC operations due to titanium's low thermal conductivity, high strength, and chemical reactivity with cutting tools. Specialized techniques are essential.

권장 가공 매개변수

매개변수값
달성 가능 공차±0.02 mm (±0.0008")
표면 조도Ra 0.8-3.2 μm
절삭 속도30-60 m/min (SFM 100-200)
이송 속도0.08-0.15 mm/tooth
공구 추천Carbide with AlTiN or TiB2 coating. 4-5 flute variable helix. Consider ceramic end mills for roughing.

전문가 가공 팁

1

Use very low cutting speeds to manage heat

2

High feed per tooth to maintain chip thickness

3

High-pressure through-spindle coolant is mandatory

4

Climb milling only — conventional milling causes severe rubbing

5

Use trochoidal milling for slots and pockets

일반 가공 부품

Turbine blade blanks

Aerospace structural fittings

Medical implant components

Compressor housings

Motorsport brackets

가공 과제

  • Rapid tool wear from chemical affinity
  • Heat concentrates at cutting edge
  • Titanium catches fire if chips ignite
  • Requires rigid machine and fixturing

가공을 시작할 준비가 되셨나요?

도면 또는 CAD 파일을 업로드하고 견적을 받아보세요.

무료 견적 받기