CNC Milling for Aluminum 7075-T6
Aluminum 7075 machines well despite its high strength, producing clean chips and good surface finishes. Higher cutting forces than 6061 require slightly more rigid setups but the material rewards with excellent precision.
권장 가공 매개변수
| 매개변수 | 값 |
|---|---|
| 달성 가능 공차 | ±0.02 mm (±0.0008") |
| 표면 조도 | Ra 0.4-1.6 μm |
| 절삭 속도 | 150-350 m/min (SFM 500-1150) |
| 이송 속도 | 0.05-0.12 mm/tooth |
| 공구 추천 | Carbide end mills with 2-3 flutes, TiAlN or ZrN coated for extended life. |
전문가 가공 팁
1
Slightly lower speeds than 6061 due to harder matrix
2
Ensure rigid workholding to prevent vibration
3
Use sharp tools to avoid work-hardening
4
Flood coolant recommended for deep pockets
일반 가공 부품
Aerospace structural components
Aircraft fittings
Gears and shafts
High-stress brackets
Military components
가공 과제
- Higher cutting forces than 6061
- Stress relieving may be needed for thin-wall parts