CNC Milling for Alloy Steel 4140
4140 alloy steel mills cleanly in the annealed condition with predictable chip formation. In the pre-hardened condition (28-32 HRC), it requires carbide tooling with appropriate coatings.
권장 가공 매개변수
| 매개변수 | 값 |
|---|---|
| 달성 가능 공차 | ±0.02 mm (±0.0008") |
| 표면 조도 | Ra 0.8-3.2 μm |
| 절삭 속도 | 80-150 m/min (SFM 260-500) |
| 이송 속도 | 0.06-0.12 mm/tooth |
| 공구 추천 | Carbide end mills with TiAlN coating, 4 flutes. Use insert mills for roughing large volumes. |
전문가 가공 팁
1
Machine in annealed condition when possible
2
Use positive rake angles for better chip flow
3
Flood coolant recommended for heat dissipation
4
Through-hardened material requires reduced speeds
일반 가공 부품
Toolholders
Shafts and spindles
Gear blanks
Coupling housings
Sprocket assemblies
가공 과제
- Higher hardness requires slower speeds
- Chip control important in deep pockets
- Pre-hardened condition accelerates tool wear