CNC Turning for Alloy Steel 4140
4140 alloy steel turns predictably with good chip formation. In the annealed state, it is straightforward to machine. Pre-hardened material requires more attention to tooling and parameters.
권장 가공 매개변수
| 매개변수 | 값 |
|---|---|
| 달성 가능 공차 | ±0.02 mm (±0.0008") |
| 표면 조도 | Ra 0.4-1.6 μm |
| 절삭 속도 | 150-250 m/min (annealed) |
| 이송 속도 | 0.10-0.30 mm/rev |
| 공구 추천 | Carbide inserts grade P20-P30 with TiCN or TiAlN coating. Use heavy-duty insert grades for pre-hardened. |
전문가 가공 팁
1
Use inserts rated for interrupted cuts if pre-hardened
2
Flood coolant for heat dissipation
3
Chip-breaking inserts recommended
4
Reduce speed 30-40% for pre-hardened stock
일반 가공 부품
Shafts and axles
Coupling hubs
Sprocket hubs
Piston rods
Toolholder bodies
가공 과제
- Pre-hardened condition wears tools faster
- Chip control at heavy depths of cut
- Work-hardened skin from hot rolling