CNC Turning for Aluminum 6061-T6
Aluminum 6061 is ideal for CNC turning, producing excellent chip formation and surface finish at high speeds. It is the most commonly turned aluminum alloy.
권장 가공 매개변수
| 매개변수 | 값 |
|---|---|
| 달성 가능 공차 | ±0.02 mm (±0.0008") |
| 표면 조도 | Ra 0.2-0.8 μm |
| 절삭 속도 | 300-600 m/min |
| 이송 속도 | 0.08-0.25 mm/rev |
| 공구 추천 | Carbide inserts with sharp edge, positive rake. PCD for high-volume. Cermet for finishing. |
전문가 가공 팁
1
Use sharp positive-rake inserts
2
High cutting speeds (300+ m/min) for best finish
3
Chip breakers may not be needed — chips break naturally
4
Light finishing passes for mirror finish
일반 가공 부품
Shafts and spindles
Bushings and spacers
Threaded fittings
Knobs and handles
Pneumatic cylinder bodies
가공 과제
- Built-up edge at low speeds
- Long chips at high depth of cut