CNC Turning for Aluminum 7075-T6
Turning 7075 aluminum requires slightly lower speeds than 6061 but still machines very well. The higher hardness actually helps chip formation and produces cleaner breaks.
권장 가공 매개변수
| 매개변수 | 값 |
|---|---|
| 달성 가능 공차 | ±0.02 mm (±0.0008") |
| 표면 조도 | Ra 0.2-0.8 μm |
| 절삭 속도 | 250-500 m/min |
| 이송 속도 | 0.08-0.20 mm/rev |
| 공구 추천 | Carbide inserts with chip breaker geometry. PCD for mirror finish. TiAlN coated for extended life. |
전문가 가공 팁
1
Use chip-breaking inserts for heavy roughing
2
Lower speeds than 6061 but still fast
3
Rigid setup important for long parts
4
Finishing passes at high speed for best Ra
일반 가공 부품
Aerospace shafts
High-strength fittings
Precision dowel pins
Threaded studs
Roller components
가공 과제
- Stress-induced warping on thin-wall parts
- Requires careful tool engagement to prevent chatter