Rapid Prototyping for Aluminum 7075-T6

When prototypes must match production strength levels, 7075 provides representative mechanical properties while maintaining fast machining for rapid turnaround.

권장 가공 매개변수

매개변수값
달성 가능 공차±0.02 mm (±0.0008")
표면 조도Ra 1.6-3.2 μm
절삭 속도150-350 m/min
이송 속도0.05-0.12 mm/tooth
공구 추천Standard carbide end mills.

전문가 가공 팁

1

Specify when strength testing is planned

2

Note: 7075 cannot be welded — design accordingly

3

Use standard T6 temper for immediate availability

일반 가공 부품

Strength test articles

Aerospace design validation

Load-bearing prototype brackets

가공 과제

  • Higher cost than 6061
  • Not weldable — assembly must use fasteners

가공을 시작할 준비가 되셨나요?

도면 또는 CAD 파일을 업로드하고 견적을 받아보세요.

무료 견적 받기