Rapid Prototyping for Stainless Steel 304
Rapid prototyping in 304 stainless provides production-representative parts for food, medical, and chemical applications where material properties must be validated.
권장 가공 매개변수
| 매개변수 | 값 |
|---|---|
| 달성 가능 공차 | ±0.02 mm (prototype standard) |
| 표면 조도 | Ra 1.6-3.2 μm |
| 절삭 속도 | 50-100 m/min |
| 이송 속도 | 0.05-0.10 mm/tooth |
| 공구 추천 | Standard carbide with TiAlN coating. |
전문가 가공 팁
1
Allow extra lead time vs aluminum (2-3x longer machining)
2
Specify 304L for welded assemblies
3
Standard tolerances unless critical dimensions identified
일반 가공 부품
Food equipment prototypes
Medical device validation
Chemical vessel test parts
가공 과제
- Longer lead time than aluminum
- Higher machining cost
- Surface finish may not match production (polished/electropolished)