Wire EDM for Aluminum 6061-T6
Wire EDM of aluminum 6061 is effective for intricate profiles and tight-tolerance features that are difficult to achieve with conventional milling. Aluminum's high conductivity enables fast cutting.
권장 가공 매개변수
| 매개변수 | 값 |
|---|---|
| 달성 가능 공차 | ±0.02 mm |
| 표면 조도 | Ra 0.4-1.0 μm |
| 절삭 속도 | Fast — high conductivity |
| 이송 속도 | Auto-tuned by EDM controller |
| 공구 추천 | Brass wire 0.20-0.25mm for general work. Coated wire for faster cutting. |
전문가 가공 팁
1
Use brass wire for best surface finish
2
Flushing is critical — aluminum produces heavy debris
3
Multiple skim cuts for tight tolerances
4
Slower settings reduce recast layer
일반 가공 부품
Complex profiles
Thin-wall features
Tight-tolerance slots
Keyways
Splines
가공 과제
- Heavy debris requires good flushing
- Recast layer on surface
- Electrolysis can affect surface