4.5-Axis CNC Machining for Titanium Grade 5 (Ti-6Al-4V)
4.5-axis machining is essential for titanium aerospace components with complex geometries. It reduces setups and improves accuracy while the continuous tool engagement helps manage titanium's poor thermal conductivity.
권장 가공 매개변수
| 매개변수 | 값 |
|---|---|
| 달성 가능 공차 | ±0.02 mm |
| 표면 조도 | Ra 0.8-3.2 μm |
| 절삭 속도 | 30-60 m/min |
| 이송 속도 | 0.08-0.15 mm/tooth |
| 공구 추천 | Uncoated or PVD-coated carbide. Ball nose for profiling. Barrel cutters for surface finish efficiency. |
전문가 가공 팁
1
Keep constant chip thickness at all angles
2
Program with tilt to avoid center-of-ball contact
3
Through-spindle high-pressure coolant is mandatory
4
Verify collisions extensively — titanium mistakes are expensive
일반 가공 부품
Turbine blades
Structural aerospace fittings
Medical implant geometries
Blisk components
Landing gear fittings
가공 과제
- Very slow material removal rate
- Highest tooling cost of any material
- Fire risk with titanium chips
- Machine hours per part can exceed 40+