Wire EDM for Titanium Grade 5 (Ti-6Al-4V)
Wire EDM is an excellent process for titanium Grade 5, bypassing all the conventional machining challenges. It cuts titanium at the same speed regardless of its hardness and eliminates tool wear entirely.
권장 가공 매개변수
| 매개변수 | 값 |
|---|---|
| 달성 가능 공차 | ±0.02 mm |
| 표면 조도 | Ra 0.2-0.8 μm |
| 절삭 속도 | Moderate — similar to stainless |
| 이송 속도 | Auto-tuned by EDM controller |
| 공구 추천 | Brass wire 0.20-0.25mm. Dedicated EDM settings for titanium. |
전문가 가공 팁
1
EDM eliminates all titanium machining challenges
2
No tool wear — pure electrical erosion
3
Excellent for medical implant profiles
4
Hydrocarbon dielectric may be needed for some features
일반 가공 부품
Medical implant profiles
Aerospace complex features
Turbine blade roots
Precision aerospace fittings
가공 과제
- Recast layer must be removed for implants
- Titanium forms tenacious oxide layer
- Slower than steel due to lower conductivity