CNC Bike Stem Manufacturing: Clamp Sizes, Materials, Machining and Stem Caps

How CNC bicycle stems are made: steerer and handlebar clamp sizes, billet vs forged stems, 7075 and 2014 aluminum, clamp edges, testing, and custom stem caps.

Last updated:

A bicycle stem connects the handlebar to the fork steerer, and it is one of the parts a rider looks at most — which is why so many small brands want their own CNC stem. Stems are machined from aluminum billet or from a forging finished by CNC, with a steerer clamp at one end and a handlebar clamp with a removable faceplate at the other. Because a stem failure means losing control of the bike, the clamp design, edge finish and testing matter more than the logo.

This guide covers the standards a stem must fit, the main construction options, the machining details that protect the handlebar and steerer, and custom stem caps, a popular small branded part.

Clamp standards

Most modern stems clamp a 1-1/8 inch (28.6 mm) steerer; tapered forks usually narrow to that size at the top. Handlebar clamps are commonly 31.8 mm on road and mountain bikes and 35 mm on many mountain bikes, with 25.4 mm and 26.0 mm on older or city bars. Stack height, stem length and rise angle then define the fit range you want to offer.

Billet, forged or forged and machined

A fully CNC machined stem starts from a block of aluminum, which gives full design freedom and suits small batches, but uses more material and machine time. A forged blank finished by CNC has a grain flow that follows the shape and less machining time per part, at the cost of forging dies that only pay off at higher volumes. Small brands usually start with billet stems and move to forging when volumes justify the tooling.

Common alloys are 7075-T6 and 2014-T6 for strength, and 6061-T6 for more cost-sensitive designs. Whatever the alloy, it should be specified with its temper and kept the same once the design has been tested.

Machining details that protect the bar and steerer

Clamps concentrate load at their edges. A sharp edge on the bore of a handlebar or steerer clamp can bite into an aluminum or carbon component and start a crack, so the clamp design and its finish are part of the safety of the bike.

  • Radius or chamfer all clamp bore edges, and keep the bore surfaces smooth and free of tool marks.
  • Hold the clamp bore diameters and roundness so the clamping force spreads evenly.
  • Keep the slot and gap geometry consistent so the specified bolt torque gives the intended clamping force.
  • Control thread quality and depth in the bolt holes; faceplate and steerer bolts are commonly M5.
  • Mark the recommended bolt torque on the stem, as riders and mechanics expect.

Testing and responsibility

Handlebar and stem assemblies should be validated before release. The ISO 4210 series of bicycle safety standards includes steering test methods, and many brands add their own fatigue tests, especially for carbon handlebars. The brand owns the design approval and testing; the machine shop makes the stem to the approved drawing, inspects the dimensions and keeps material and process consistent between batches.

Custom stem caps and small branded parts

The top cap on the steerer and the stem faceplate are favourite places for a logo. Custom stem caps are small, quick parts to machine from aluminum, anodized in brand colors and laser marked or engraved, and they let a brand put its name on a bike without developing a full stem. They still need to fit the steerer and the preload bolt correctly.

What to send for a stem RFQ

  • Drawing and 3D model with clamp diameters, slot geometry, bolt threads and edge radii.
  • Lengths and rise angles in the range, and the quantity of each.
  • Material and temper, finish, colors and marking, including the torque marking.
  • Bolt specification and whether bolts are supplied, plus packaging.

Stems at Chi Xin

Chi Xin Technology is a CNC machine shop in Nantun District, Taichung, Taiwan, founded in 2022. We run 5+ CNC machines — 4.5-axis CNC machining centers and CNC lathes — and mainly machine aluminum alloys and alloy steel, with a metal tolerance of 0.02 mm. We also offer wire EDM and surface finishing including anodizing, and we export to customers in Europe and North America.

We machine bicycle stems, stem caps and other bicycle core parts from aluminum, with anodizing. Send the drawing and size range, and we confirm material, finish and tolerances in the quotation.

Frequently asked questions

What are the standard bike stem clamp sizes?

Steerer clamps are mostly 1-1/8 inch (28.6 mm). Handlebar clamps are commonly 31.8 mm or 35 mm, with 25.4 mm and 26.0 mm on older and city bars.

Is a CNC billet stem as strong as a forged stem?

Both can be strong enough when designed and tested properly. Forging gives a grain flow that follows the shape and suits higher volumes; billet suits small batches and design freedom. Validate either one with steering and fatigue tests.

Can you make custom stem caps with our logo?

Yes. Stem caps are machined from aluminum, anodized and laser marked or engraved. Send the logo artwork, colors and the steerer size.

Why do clamp edges need to be radiused?

A sharp edge concentrates the clamping load and can damage an aluminum or carbon handlebar or steerer, starting a crack. Radiused edges spread the load.

Have a drawing ready?

Upload your drawing or CAD file and get a quote.

Get a Quote
WhatsAppEmail drawings