CNC Turning for Copper C110 (ETP Copper)
Turning copper is challenging due to its extreme ductility and tendency to produce long, unmanageable chips. Specialized chip-breaking techniques are essential.
Parametres d'usinage recommandes
| Parametre | Valeur |
|---|---|
| Tolerances realisables | ±0.02 mm (±0.0008") |
| Etat de surface | Ra 0.4-1.6 μm |
| Vitesse de coupe | 150-400 m/min |
| Vitesse d'avance | 0.10-0.25 mm/rev |
| Outillage recommande | PCD inserts for best finish. Sharp uncoated carbide with chip-breaking geometry. Avoid TiAlN-coated tools. |
Conseils d'usinage expert
1
Use sharp positive-rake inserts with chip breaker
2
Higher feeds help chips break
3
Keep tool extremely sharp — dull tools smear
4
Compressed air instead of flood coolant for chip management
Pieces couramment fabriquees
Bus bar terminals
Electrical connectors
Heat sink pins
Grounding rods
Waveguide elements
Defis d'usinage
- Long stringy chips wrapping around workpiece
- Material adhesion to tools
- Burr formation
- Surface tearing if tool dull