CNC Turning for Aluminum 6061-T6

Aluminum 6061 is ideal for CNC turning, producing excellent chip formation and surface finish at high speeds. It is the most commonly turned aluminum alloy.

Parametres d'usinage recommandes

ParametreValeur
Tolerances realisables±0.02 mm (±0.0008")
Etat de surfaceRa 0.2-0.8 μm
Vitesse de coupe300-600 m/min
Vitesse d'avance0.08-0.25 mm/rev
Outillage recommandeCarbide inserts with sharp edge, positive rake. PCD for high-volume. Cermet for finishing.

Conseils d'usinage expert

1

Use sharp positive-rake inserts

2

High cutting speeds (300+ m/min) for best finish

3

Chip breakers may not be needed — chips break naturally

4

Light finishing passes for mirror finish

Pieces couramment fabriquees

Shafts and spindles

Bushings and spacers

Threaded fittings

Knobs and handles

Pneumatic cylinder bodies

Defis d'usinage

  • Built-up edge at low speeds
  • Long chips at high depth of cut

Pret a commencer l'usinage ?

Téléchargez votre plan ou fichier CAO et recevez un devis.

Devis gratuit