Wire EDM for Aluminum 6061-T6
Wire EDM of aluminum 6061 is effective for intricate profiles and tight-tolerance features that are difficult to achieve with conventional milling. Aluminum's high conductivity enables fast cutting.
Parametres d'usinage recommandes
| Parametre | Valeur |
|---|---|
| Tolerances realisables | ±0.02 mm |
| Etat de surface | Ra 0.4-1.0 μm |
| Vitesse de coupe | Fast — high conductivity |
| Vitesse d'avance | Auto-tuned by EDM controller |
| Outillage recommande | Brass wire 0.20-0.25mm for general work. Coated wire for faster cutting. |
Conseils d'usinage expert
1
Use brass wire for best surface finish
2
Flushing is critical — aluminum produces heavy debris
3
Multiple skim cuts for tight tolerances
4
Slower settings reduce recast layer
Pieces couramment fabriquees
Complex profiles
Thin-wall features
Tight-tolerance slots
Keyways
Splines
Defis d'usinage
- Heavy debris requires good flushing
- Recast layer on surface
- Electrolysis can affect surface