Wire EDM for Stainless Steel 304
Wire EDM of 304 stainless is an excellent alternative to milling for complex profiles, as EDM is unaffected by work-hardening. The material cuts predictably with good surface finish.
Parametres d'usinage recommandes
| Parametre | Valeur |
|---|---|
| Tolerances realisables | ±0.02 mm |
| Etat de surface | Ra 0.2-0.8 μm |
| Vitesse de coupe | Moderate — lower conductivity than aluminum |
| Vitesse d'avance | Auto-tuned by EDM controller |
| Outillage recommande | Brass wire 0.20-0.25mm. Coated wire for faster roughing. |
Conseils d'usinage expert
1
No work-hardening concern with EDM
2
Multiple skim cuts for mirror finish
3
Deionized water dielectric standard
4
Good choice for intricate medical device features
Pieces couramment fabriquees
Medical device profiles
Surgical instrument features
Complex valve seats
Stencils and screens
Defis d'usinage
- Slower than aluminum due to lower conductivity
- Recast layer may affect corrosion resistance