CNC Turning for Stainless Steel 304

Turning 304 stainless requires constant chip engagement and sharp tooling. The material's work-hardening tendency makes it essential to never let the tool dwell or rub.

Parametres d'usinage recommandes

ParametreValeur
Tolerances realisables±0.02 mm (±0.0008")
Etat de surfaceRa 0.8-3.2 μm
Vitesse de coupe100-200 m/min
Vitesse d'avance0.10-0.25 mm/rev
Outillage recommandeCarbide inserts grade M20-M30 with TiAlN coating. Use chip-breaking geometry. Cermet for finishing.

Conseils d'usinage expert

1

Never reduce feed below 0.05 mm/rev — the tool must cut, not rub

2

Use chip-breaking inserts always

3

High-pressure coolant directed at cutting zone

4

Replace inserts frequently — dull tools cause work-hardening

Pieces couramment fabriquees

Fittings and couplings

Valve stems

Medical device shafts

Food processing rollers

Fasteners

Defis d'usinage

  • Severe work-hardening
  • Stringy chips difficult to break
  • Built-up edge formation
  • High cutting temperatures

Pret a commencer l'usinage ?

Téléchargez votre plan ou fichier CAO et recevez un devis.

Devis gratuit