CNC Turning for Alloy Steel 4140
4140 alloy steel turns predictably with good chip formation. In the annealed state, it is straightforward to machine. Pre-hardened material requires more attention to tooling and parameters.
Parametres d'usinage recommandes
| Parametre | Valeur |
|---|---|
| Tolerances realisables | ±0.02 mm (±0.0008") |
| Etat de surface | Ra 0.4-1.6 μm |
| Vitesse de coupe | 150-250 m/min (annealed) |
| Vitesse d'avance | 0.10-0.30 mm/rev |
| Outillage recommande | Carbide inserts grade P20-P30 with TiCN or TiAlN coating. Use heavy-duty insert grades for pre-hardened. |
Conseils d'usinage expert
1
Use inserts rated for interrupted cuts if pre-hardened
2
Flood coolant for heat dissipation
3
Chip-breaking inserts recommended
4
Reduce speed 30-40% for pre-hardened stock
Pieces couramment fabriquees
Shafts and axles
Coupling hubs
Sprocket hubs
Piston rods
Toolholder bodies
Defis d'usinage
- Pre-hardened condition wears tools faster
- Chip control at heavy depths of cut
- Work-hardened skin from hot rolling