CNC Turning for Aluminum 7075-T6
Turning 7075 aluminum requires slightly lower speeds than 6061 but still machines very well. The higher hardness actually helps chip formation and produces cleaner breaks.
Parametres d'usinage recommandes
| Parametre | Valeur |
|---|---|
| Tolerances realisables | ±0.02 mm (±0.0008") |
| Etat de surface | Ra 0.2-0.8 μm |
| Vitesse de coupe | 250-500 m/min |
| Vitesse d'avance | 0.08-0.20 mm/rev |
| Outillage recommande | Carbide inserts with chip breaker geometry. PCD for mirror finish. TiAlN coated for extended life. |
Conseils d'usinage expert
1
Use chip-breaking inserts for heavy roughing
2
Lower speeds than 6061 but still fast
3
Rigid setup important for long parts
4
Finishing passes at high speed for best Ra
Pieces couramment fabriquees
Aerospace shafts
High-strength fittings
Precision dowel pins
Threaded studs
Roller components
Defis d'usinage
- Stress-induced warping on thin-wall parts
- Requires careful tool engagement to prevent chatter