Rapid Prototyping for Aluminum 7075-T6
When prototypes must match production strength levels, 7075 provides representative mechanical properties while maintaining fast machining for rapid turnaround.
Parametres d'usinage recommandes
| Parametre | Valeur |
|---|---|
| Tolerances realisables | ±0.02 mm (±0.0008") |
| Etat de surface | Ra 1.6-3.2 μm |
| Vitesse de coupe | 150-350 m/min |
| Vitesse d'avance | 0.05-0.12 mm/tooth |
| Outillage recommande | Standard carbide end mills. |
Conseils d'usinage expert
1
Specify when strength testing is planned
2
Note: 7075 cannot be welded — design accordingly
3
Use standard T6 temper for immediate availability
Pieces couramment fabriquees
Strength test articles
Aerospace design validation
Load-bearing prototype brackets
Defis d'usinage
- Higher cost than 6061
- Not weldable — assembly must use fasteners