CNC Milling for Copper C110 (ETP Copper)
CNC milling copper is challenging due to its softness and tendency to produce long, stringy chips. Sharp tooling and appropriate chip-breaking strategies are essential for successful results.
Parametres d'usinage recommandes
| Parametre | Valeur |
|---|---|
| Tolerances realisables | ±0.02 mm (±0.0008") |
| Etat de surface | Ra 0.4-1.6 μm |
| Vitesse de coupe | 100-300 m/min (SFM 330-1000) |
| Vitesse d'avance | 0.05-0.15 mm/tooth |
| Outillage recommande | Carbide with sharp edges, 2-3 flutes. PCD tools for best finish. Avoid TiAlN coatings (copper affinity). |
Conseils d'usinage expert
1
Use very sharp tools with positive rake
2
High feed rates help with chip breaking
3
Consider chip-breaking geometry end mills
4
Avoid rubbing — maintain constant chip load
5
Use compressed air or mist coolant
Pieces couramment fabriquees
Bus bars
Heat exchanger plates
Electrode components
RF cavities
Cooling channel blocks
Defis d'usinage
- Long stringy chips wrap around tools
- Material adhesion to cutting edges
- Burr formation on exits
- Soft material deforms easily