Rapid Prototyping for Copper C110 (ETP Copper)
Copper rapid prototyping is used for thermal and electrical validation where conductivity testing requires the actual production material.
Parametres d'usinage recommandes
| Parametre | Valeur |
|---|---|
| Tolerances realisables | ±0.02 mm |
| Etat de surface | Ra 0.8-1.6 μm |
| Vitesse de coupe | 100-300 m/min |
| Vitesse d'avance | 0.05-0.15 mm/tooth |
| Outillage recommande | Sharp uncoated carbide or PCD. |
Conseils d'usinage expert
1
Sharp tooling essential for good finish
2
Challenging to machine — allow extra lead time
3
Specify if high-purity C101 is needed vs standard C110
Pieces couramment fabriquees
Heat sink prototypes
Bus bar validation
Electrical contact prototypes
Defis d'usinage
- Gummy material — surface finish may need extra passes
- Tarnishes quickly — may need protective coating