4.5-Axis CNC Machining for Copper C110 (ETP Copper)
4.5-axis machining of copper is used for complex waveguide cavities, RF components, and electrode manufacturing where the compound geometries cannot be achieved with 3-axis work.
Parametres d'usinage recommandes
| Parametre | Valeur |
|---|---|
| Tolerances realisables | ±0.02 mm |
| Etat de surface | Ra 0.4-1.6 μm |
| Vitesse de coupe | 100-300 m/min |
| Vitesse d'avance | 0.05-0.15 mm/tooth |
| Outillage recommande | PCD ball nose end mills. Sharp uncoated carbide. Polished flute tools to reduce adhesion. |
Conseils d'usinage expert
1
Manage long chips carefully with through-spindle air
2
Program consistent engagement to avoid chip nesting
3
PCD tooling for best surface quality
4
Consider EDM for very complex cavity shapes
Pieces couramment fabriquees
Waveguide cavities
RF resonators
Complex electrode shapes
Particle accelerator components
Defis d'usinage
- Chip management in enclosed 4.5-axis work envelope
- Material softness causes deflection
- High material cost for large billets