CNC Turning for Titanium Grade 5 (Ti-6Al-4V)

Turning titanium Grade 5 requires careful parameter control due to its poor thermal conductivity, high strength, and chemical affinity with tool materials. Rigid setups and sharp tooling are mandatory.

建議加工參數

參數數值
可達公差±0.02 mm (±0.0008")
表面光潔度Ra 0.8-3.2 μm
切削速度40-80 m/min
進給速率0.10-0.20 mm/rev
刀具建議Uncoated carbide (S grade) or PVD coated. Sharp positive inserts. Consider PCD for finishing.

專家加工技巧

1

Low cutting speeds — heat has nowhere to go

2

Maintain positive chip flow at all times

3

High-pressure coolant aimed precisely at cutting zone

4

Use C-style or rhombic inserts for better heat dissipation

5

Never recut chips — they work-harden instantly

常見加工零件

Medical implant shafts

Aerospace fasteners

Turbine shaft sleeves

Valve stems

Racing axle components

加工挑戰

  • Chemical reaction with tool coatings
  • Chip can ignite if too thin
  • Spring-back causes dimensional issues
  • Requires specialized coolant management

準備開始加工了嗎?

上傳圖面或 CAD 檔案,即可取得報價。

免費取得報價