CNC Milling for Titanium Grade 5 (Ti-6Al-4V)

Milling Ti-6Al-4V is one of the most challenging CNC operations due to titanium's low thermal conductivity, high strength, and chemical reactivity with cutting tools. Specialized techniques are essential.

建議加工參數

參數數值
可達公差±0.02 mm (±0.0008")
表面光潔度Ra 0.8-3.2 μm
切削速度30-60 m/min (SFM 100-200)
進給速率0.08-0.15 mm/tooth
刀具建議Carbide with AlTiN or TiB2 coating. 4-5 flute variable helix. Consider ceramic end mills for roughing.

專家加工技巧

1

Use very low cutting speeds to manage heat

2

High feed per tooth to maintain chip thickness

3

High-pressure through-spindle coolant is mandatory

4

Climb milling only — conventional milling causes severe rubbing

5

Use trochoidal milling for slots and pockets

常見加工零件

Turbine blade blanks

Aerospace structural fittings

Medical implant components

Compressor housings

Motorsport brackets

加工挑戰

  • Rapid tool wear from chemical affinity
  • Heat concentrates at cutting edge
  • Titanium catches fire if chips ignite
  • Requires rigid machine and fixturing

準備開始加工了嗎?

上傳圖面或 CAD 檔案,即可取得報價。

免費取得報價