Wire EDM for Titanium Grade 5 (Ti-6Al-4V)
Wire EDM is an excellent process for titanium Grade 5, bypassing all the conventional machining challenges. It cuts titanium at the same speed regardless of its hardness and eliminates tool wear entirely.
建議加工參數
| 參數 | 數值 |
|---|---|
| 可達公差 | ±0.02 mm |
| 表面光潔度 | Ra 0.2-0.8 μm |
| 切削速度 | Moderate — similar to stainless |
| 進給速率 | Auto-tuned by EDM controller |
| 刀具建議 | Brass wire 0.20-0.25mm. Dedicated EDM settings for titanium. |
專家加工技巧
1
EDM eliminates all titanium machining challenges
2
No tool wear — pure electrical erosion
3
Excellent for medical implant profiles
4
Hydrocarbon dielectric may be needed for some features
常見加工零件
Medical implant profiles
Aerospace complex features
Turbine blade roots
Precision aerospace fittings
加工挑戰
- Recast layer must be removed for implants
- Titanium forms tenacious oxide layer
- Slower than steel due to lower conductivity