Wire EDM for Aluminum 7075-T6

Wire EDM is used for 7075 aluminum when complex profiles, sharp internal corners, or features beyond milling capability are needed. The high zinc content machines well with EDM.

建議加工參數

參數數值
可達公差±0.02 mm
表面光潔度Ra 0.4-1.0 μm
切削速度Fast — high conductivity
進給速率Auto-tuned by EDM controller
刀具建議Brass wire 0.20-0.25mm. Zinc-coated wire for speed.

專家加工技巧

1

Similar parameters to 6061

2

Multiple skim passes for aerospace tolerances

3

Adequate flushing pressure

4

Deburr recast layer for fatigue-critical parts

常見加工零件

Aerospace profiles

Slot features

Complex contours

Precision shims

加工挑戰

  • Recast layer must be removed for fatigue-critical aerospace parts
  • Stress relief recommended after EDM

準備開始加工了嗎?

上傳圖面或 CAD 檔案,即可取得報價。

免費取得報價