Rapid Prototyping for Aluminum 7075-T6
When prototypes must match production strength levels, 7075 provides representative mechanical properties while maintaining fast machining for rapid turnaround.
建議加工參數
| 參數 | 數值 |
|---|---|
| 可達公差 | ±0.02 mm (±0.0008") |
| 表面光潔度 | Ra 1.6-3.2 μm |
| 切削速度 | 150-350 m/min |
| 進給速率 | 0.05-0.12 mm/tooth |
| 刀具建議 | Standard carbide end mills. |
專家加工技巧
1
Specify when strength testing is planned
2
Note: 7075 cannot be welded — design accordingly
3
Use standard T6 temper for immediate availability
常見加工零件
Strength test articles
Aerospace design validation
Load-bearing prototype brackets
加工挑戰
- Higher cost than 6061
- Not weldable — assembly must use fasteners