4.5-Axis CNC Machining for Titanium Grade 5 (Ti-6Al-4V)

4.5-axis machining is essential for titanium aerospace components with complex geometries. It reduces setups and improves accuracy while the continuous tool engagement helps manage titanium's poor thermal conductivity.

建議加工參數

參數數值
可達公差±0.02 mm
表面光潔度Ra 0.8-3.2 μm
切削速度30-60 m/min
進給速率0.08-0.15 mm/tooth
刀具建議Uncoated or PVD-coated carbide. Ball nose for profiling. Barrel cutters for surface finish efficiency.

專家加工技巧

1

Keep constant chip thickness at all angles

2

Program with tilt to avoid center-of-ball contact

3

Through-spindle high-pressure coolant is mandatory

4

Verify collisions extensively — titanium mistakes are expensive

常見加工零件

Turbine blades

Structural aerospace fittings

Medical implant geometries

Blisk components

Landing gear fittings

加工挑戰

  • Very slow material removal rate
  • Highest tooling cost of any material
  • Fire risk with titanium chips
  • Machine hours per part can exceed 40+

準備開始加工了嗎?

上傳圖面或 CAD 檔案,即可取得報價。

免費取得報價