CNC Milling for Stainless Steel 304

CNC milling 304 stainless steel requires careful attention to cutting parameters due to its tendency to work-harden. Proper speeds, feeds, and tooling selection are critical for successful machining.

建議加工參數

參數數值
可達公差±0.02 mm (±0.0008")
表面光潔度Ra 0.8-3.2 μm
切削速度50-100 m/min (SFM 165-330)
進給速率0.05-0.10 mm/tooth
刀具建議Carbide end mills with TiAlN or AlTiN coating, 4-5 flutes for finishing. Use variable helix to reduce chatter.

專家加工技巧

1

Maintain constant chip load — never let the tool rub

2

Use climb milling exclusively

3

Keep tools sharp; replace at first sign of wear

4

High-pressure through-spindle coolant recommended

5

Reduce speed for interrupted cuts

常見加工零件

Food processing equipment

Medical instrument housings

Chemical vessel components

Architectural fittings

Valve bodies

加工挑戰

  • Severe work-hardening if tool rubs
  • Built-up edge formation
  • High heat generation at tool-chip interface
  • Stringy chips difficult to manage

準備開始加工了嗎?

上傳圖面或 CAD 檔案,即可取得報價。

免費取得報價