CNC Milling for Alloy Steel 4140

4140 alloy steel mills cleanly in the annealed condition with predictable chip formation. In the pre-hardened condition (28-32 HRC), it requires carbide tooling with appropriate coatings.

建議加工參數

參數數值
可達公差±0.02 mm (±0.0008")
表面光潔度Ra 0.8-3.2 μm
切削速度80-150 m/min (SFM 260-500)
進給速率0.06-0.12 mm/tooth
刀具建議Carbide end mills with TiAlN coating, 4 flutes. Use insert mills for roughing large volumes.

專家加工技巧

1

Machine in annealed condition when possible

2

Use positive rake angles for better chip flow

3

Flood coolant recommended for heat dissipation

4

Through-hardened material requires reduced speeds

常見加工零件

Toolholders

Shafts and spindles

Gear blanks

Coupling housings

Sprocket assemblies

加工挑戰

  • Higher hardness requires slower speeds
  • Chip control important in deep pockets
  • Pre-hardened condition accelerates tool wear

準備開始加工了嗎?

上傳圖面或 CAD 檔案,即可取得報價。

免費取得報價