CNC Milling for Aluminum 6061-T6

Aluminum 6061 is one of the most popular materials for CNC milling due to its excellent machinability, good strength, and cost-effectiveness. It machines cleanly with minimal tool wear and produces an excellent surface finish.

建議加工參數

參數數值
可達公差±0.02 mm (±0.0008")
表面光潔度Ra 0.4-1.6 μm
切削速度200-400 m/min (SFM 650-1300)
進給速率0.05-0.15 mm/tooth
刀具建議Carbide end mills with 2-3 flutes, uncoated or ZrN coated. HSS acceptable for prototyping.

專家加工技巧

1

Use high spindle speeds (8,000-15,000 RPM) for optimal chip formation

2

Climb milling preferred for better surface finish

3

Use 3-flute end mills for efficient chip evacuation

4

Coolant recommended but not always required

5

Can achieve mirror finishes with proper parameters

常見加工零件

Housings and enclosures

Brackets and mounting plates

Heat sinks

Structural frames

Jigs and fixtures

加工挑戰

  • Built-up edge at low speeds
  • Material may gall on tool at insufficient chip load

準備開始加工了嗎?

上傳圖面或 CAD 檔案,即可取得報價。

免費取得報價