CNC Turning for Aluminum 6061-T6

Aluminum 6061 is ideal for CNC turning, producing excellent chip formation and surface finish at high speeds. It is the most commonly turned aluminum alloy.

建議加工參數

參數數值
可達公差±0.02 mm (±0.0008")
表面光潔度Ra 0.2-0.8 μm
切削速度300-600 m/min
進給速率0.08-0.25 mm/rev
刀具建議Carbide inserts with sharp edge, positive rake. PCD for high-volume. Cermet for finishing.

專家加工技巧

1

Use sharp positive-rake inserts

2

High cutting speeds (300+ m/min) for best finish

3

Chip breakers may not be needed — chips break naturally

4

Light finishing passes for mirror finish

常見加工零件

Shafts and spindles

Bushings and spacers

Threaded fittings

Knobs and handles

Pneumatic cylinder bodies

加工挑戰

  • Built-up edge at low speeds
  • Long chips at high depth of cut

準備開始加工了嗎?

上傳圖面或 CAD 檔案,即可取得報價。

免費取得報價