Surface Finishing for Alloy Steel 4140
Carbon and alloy steels require surface treatment for corrosion protection. Options range from simple black oxide to hard chrome plating for wear resistance.
Recommended Machining Parameters
| Parameter | Value |
|---|---|
| Achievable Tolerances | ±0.02 mm (±0.0008") |
| Surface Finish | Ra 0.2-3.2 μm depending on treatment |
| Cutting Speed | N/A |
| Feed Rate | N/A |
| Tooling Recommendations | N/A — surface finishing process |
Expert Machining Tips
1
Black oxide is minimum corrosion protection
2
Zinc plating for moderate protection
3
Hard chrome for bearing and wear surfaces
4
Nitride for surface hardness without dimensional change
Common Parts Made
Black oxide shafts
Zinc-plated fasteners
Hard-chromed cylinders
Nitrided gears
Machining Challenges
- Steel will rust without surface treatment
- Hard chrome adds 12-50μm per side
- Some plating processes use hazardous chemicals (hex chrome)