Surface Finishing for Stainless Steel 304
Surface finishing of 304 stainless focuses on enhancing its natural corrosion resistance and appearance. Passivation, electropolish, and mechanical finishing are the primary methods.
Recommended Machining Parameters
| Parameter | Value |
|---|---|
| Achievable Tolerances | ±0.02 mm (±0.0008") |
| Surface Finish | Ra 0.05-3.2 μm (electropolish to bead blast) |
| Cutting Speed | N/A |
| Feed Rate | N/A |
| Tooling Recommendations | N/A — surface finishing process |
Expert Machining Tips
1
Passivation is the minimum recommended finish
2
Electropolish for medical and food grade
3
Mirror polish achievable with multiple grits
4
Bead blast for uniform matte satin finish
Common Parts Made
Electropolished food equipment
Passivated medical devices
Mirror-polished architectural hardware
Bead-blasted industrial components
Machining Challenges
- Electropolish removes 10-25μm per surface
- Mirror polish is labor-intensive and expensive
- Passivation requires citric or nitric acid treatment