Wire EDM for Alloy Steel 4140
Wire EDM excels with 4140 steel, particularly in the hardened condition where conventional machining becomes difficult. EDM is unaffected by material hardness.
Recommended Machining Parameters
| Parameter | Value |
|---|---|
| Achievable Tolerances | ±0.02 mm |
| Surface Finish | Ra 0.2-0.8 μm |
| Cutting Speed | Moderate to fast |
| Feed Rate | Auto-tuned by EDM controller |
| Tooling Recommendations | Brass wire standard. Zinc-coated for roughing speed. |
Expert Machining Tips
1
Can cut hardened (60 HRC) material with ease
2
Excellent for die and mold applications
3
Multiple skim passes for precision tooling
4
Stress relief recommended for precision work
Common Parts Made
Die profiles
Punch shapes
Keyways in hardened shafts
Gear profiles
Spline cuts
Machining Challenges
- Recast layer (white layer) affects fatigue life
- Stress relief needed for precision work
- HAZ may alter local hardness