Rapid Prototyping for Copper C110 (ETP Copper)
Copper rapid prototyping is used for thermal and electrical validation where conductivity testing requires the actual production material.
권장 가공 매개변수
| 매개변수 | 값 |
|---|---|
| 달성 가능 공차 | ±0.02 mm |
| 표면 조도 | Ra 0.8-1.6 μm |
| 절삭 속도 | 100-300 m/min |
| 이송 속도 | 0.05-0.15 mm/tooth |
| 공구 추천 | Sharp uncoated carbide or PCD. |
전문가 가공 팁
1
Sharp tooling essential for good finish
2
Challenging to machine — allow extra lead time
3
Specify if high-purity C101 is needed vs standard C110
일반 가공 부품
Heat sink prototypes
Bus bar validation
Electrical contact prototypes
가공 과제
- Gummy material — surface finish may need extra passes
- Tarnishes quickly — may need protective coating