CNC Milling for Copper C110 (ETP Copper)

CNC milling copper is challenging due to its softness and tendency to produce long, stringy chips. Sharp tooling and appropriate chip-breaking strategies are essential for successful results.

권장 가공 매개변수

매개변수값
달성 가능 공차±0.02 mm (±0.0008")
표면 조도Ra 0.4-1.6 μm
절삭 속도100-300 m/min (SFM 330-1000)
이송 속도0.05-0.15 mm/tooth
공구 추천Carbide with sharp edges, 2-3 flutes. PCD tools for best finish. Avoid TiAlN coatings (copper affinity).

전문가 가공 팁

1

Use very sharp tools with positive rake

2

High feed rates help with chip breaking

3

Consider chip-breaking geometry end mills

4

Avoid rubbing — maintain constant chip load

5

Use compressed air or mist coolant

일반 가공 부품

Bus bars

Heat exchanger plates

Electrode components

RF cavities

Cooling channel blocks

가공 과제

  • Long stringy chips wrap around tools
  • Material adhesion to cutting edges
  • Burr formation on exits
  • Soft material deforms easily

가공을 시작할 준비가 되셨나요?

도면 또는 CAD 파일을 업로드하고 견적을 받아보세요.

무료 견적 받기