4.5-Axis CNC Machining for Copper C110 (ETP Copper)
4.5-axis machining of copper is used for complex waveguide cavities, RF components, and electrode manufacturing where the compound geometries cannot be achieved with 3-axis work.
권장 가공 매개변수
| 매개변수 | 값 |
|---|---|
| 달성 가능 공차 | ±0.02 mm |
| 표면 조도 | Ra 0.4-1.6 μm |
| 절삭 속도 | 100-300 m/min |
| 이송 속도 | 0.05-0.15 mm/tooth |
| 공구 추천 | PCD ball nose end mills. Sharp uncoated carbide. Polished flute tools to reduce adhesion. |
전문가 가공 팁
1
Manage long chips carefully with through-spindle air
2
Program consistent engagement to avoid chip nesting
3
PCD tooling for best surface quality
4
Consider EDM for very complex cavity shapes
일반 가공 부품
Waveguide cavities
RF resonators
Complex electrode shapes
Particle accelerator components
가공 과제
- Chip management in enclosed 4.5-axis work envelope
- Material softness causes deflection
- High material cost for large billets