CNC Turning for Copper C110 (ETP Copper)
Turning copper is challenging due to its extreme ductility and tendency to produce long, unmanageable chips. Specialized chip-breaking techniques are essential.
권장 가공 매개변수
| 매개변수 | 값 |
|---|---|
| 달성 가능 공차 | ±0.02 mm (±0.0008") |
| 표면 조도 | Ra 0.4-1.6 μm |
| 절삭 속도 | 150-400 m/min |
| 이송 속도 | 0.10-0.25 mm/rev |
| 공구 추천 | PCD inserts for best finish. Sharp uncoated carbide with chip-breaking geometry. Avoid TiAlN-coated tools. |
전문가 가공 팁
1
Use sharp positive-rake inserts with chip breaker
2
Higher feeds help chips break
3
Keep tool extremely sharp — dull tools smear
4
Compressed air instead of flood coolant for chip management
일반 가공 부품
Bus bar terminals
Electrical connectors
Heat sink pins
Grounding rods
Waveguide elements
가공 과제
- Long stringy chips wrapping around workpiece
- Material adhesion to tools
- Burr formation
- Surface tearing if tool dull