A derailleur hanger is the small replaceable part that connects the rear derailleur to the frame. It is designed to bend or break in a crash so that the frame and the derailleur survive, which means a good hanger is not simply as strong as possible: it has to be accurate when new and fail in a predictable way when overloaded. Frame brands usually have hangers CNC machined from aluminum plate or bar in small and medium batches, because every frame-specific design needs its own part and riders need spares for years.
This guide covers what a machine shop needs to know to make a hanger that fits, shifts well and protects the frame, and what a frame brand should put in its drawing and RFQ.
Frame-specific hangers and the UDH standard
For a long time almost every frame had its own hanger shape, which is why shops and riders still search for a hanger by frame model or by the hanger number printed on it. In 2019 SRAM introduced the Universal Derailleur Hanger (UDH), an open design that many frame makers now use, and SRAM's Transmission derailleurs mount directly to frames built around the UDH interface.
If you are designing a new frame, decide early whether it will use UDH or a frame-specific hanger. A frame-specific hanger gives you freedom in shape and fixing, but you take on the job of supplying spares; a UDH frame lets riders buy a standard part. Either way, the hanger drawing must match the dropout geometry exactly.
Why the hanger is a designed weak point
The hanger sits low and to the side, exactly where a crash or a stick in the wheel hits first. Its section — thickness, width at the narrowest point and the radius of the transitions — decides whether it bends, breaks or passes the load into the dropout. Frame brands normally tune that behaviour with prototypes and their own tests; the machine shop's job is to reproduce the section consistently from batch to batch.
- Keep the critical section dimensions toleranced on the drawing so every batch behaves the same way.
- Avoid sharp internal corners outside the intended weak point; they create stress raisers in the wrong place.
- If the design relies on a specific alloy and temper, name it, because changing the alloy changes the failure behaviour.
Materials and finish
Most hangers are machined from heat-treated aluminum alloy, commonly 6061-T6 or 7075-T6. 7075 is stronger and stiffer, so a hanger of the same shape resists bending longer; 6061 bends more readily, which some brands prefer because a bent hanger can sometimes be realigned. Steel hangers exist for some touring, cargo and e-bike frames where stiffness matters more than weight.
Hangers are usually anodized for corrosion protection and appearance, often black. Anodizing adds a thin layer to every surface, so masking or a thread allowance is needed on the derailleur thread and on precise fitting faces.
Features that decide shifting quality
A hanger that is a fraction out of line moves the derailleur pulley out of plane with the cassette, and the rider feels it as poor shifting. The features that matter most are the ones that locate the derailleur relative to the hub axle.
- The derailleur mounting thread: rear derailleurs use an M10 x 1 mounting bolt, and the thread axis should be square to the dropout face.
- Flatness and parallelism of the faces that clamp against the dropout and the derailleur.
- The axle hole or slot position relative to the derailleur thread, because it sets where the derailleur sits around the cassette.
- Fixing-bolt holes and any anti-rotation tab that keys the hanger to the dropout.
- Burr-free edges and a clean thread, because a damaged first thread is a common reason for a hanger to be rejected.
Machining and inspection
Hangers are small, flat parts with features on both faces, so they are usually milled from plate in fixtures that hold several parts, then flipped for the second side. Threads are cut or formed after the profile so the thread axis can be checked against the clamping face. For a batch, measure the thread squareness, the critical section and the hole positions on a first article before the run continues.
What to send for a derailleur hanger RFQ
- A dimensioned drawing and 3D model, with the critical section and the derailleur thread toleranced.
- The dropout drawing or a frame sample, so the fit can be checked.
- Material grade and temper, finish and anodize color, and any part number or logo to be laser marked.
- Fixing hardware: whether bolts are supplied by you or need to be sourced, and how parts are packed for spares.
- Quantities for the first batch and expected spares batches.
Derailleur hangers at Chi Xin
Chi Xin Technology is a CNC machine shop in Nantun District, Taichung, Taiwan, founded in 2022. We run 5+ CNC machines — 4.5-axis CNC machining centers and CNC lathes — and mainly machine aluminum alloys and alloy steel, with a metal tolerance of 0.02 mm. We also offer wire EDM and surface finishing including anodizing, and we export to customers in Europe and North America.
We machine derailleur hangers and other bicycle core parts for frame and component brands. Send the hanger drawing together with the dropout geometry, and we confirm material, finish and tolerances in the quotation.
Frequently asked questions
Are all derailleur hangers the same?
No. Many frames use a frame-specific hanger, so a hanger is matched by frame model or hanger number. Frames built around SRAM's Universal Derailleur Hanger (UDH) share one standard part.
Should a derailleur hanger be made from 6061 or 7075 aluminum?
Both are common. 7075-T6 is stronger and resists bending longer; 6061-T6 bends more readily and is sometimes preferred so the hanger gives way before the frame. Choose the alloy as part of the design and keep it fixed between batches.
What thread does a rear derailleur mount use?
Rear derailleurs mount with an M10 x 1 bolt. The thread axis must be square to the dropout face, or shifting suffers.
Can you make hangers from a sample if we have no drawing?
A sample helps, but a drawing with toleranced features is better because the hanger has to fit the dropout and behave consistently. Send the sample and the frame dropout details and we can discuss what is needed.