CNC Turning for Copper C110 (ETP Copper)

Turning copper is challenging due to its extreme ductility and tendency to produce long, unmanageable chips. Specialized chip-breaking techniques are essential.

建議加工參數

參數數值
可達公差±0.02 mm (±0.0008")
表面光潔度Ra 0.4-1.6 μm
切削速度150-400 m/min
進給速率0.10-0.25 mm/rev
刀具建議PCD inserts for best finish. Sharp uncoated carbide with chip-breaking geometry. Avoid TiAlN-coated tools.

專家加工技巧

1

Use sharp positive-rake inserts with chip breaker

2

Higher feeds help chips break

3

Keep tool extremely sharp — dull tools smear

4

Compressed air instead of flood coolant for chip management

常見加工零件

Bus bar terminals

Electrical connectors

Heat sink pins

Grounding rods

Waveguide elements

加工挑戰

  • Long stringy chips wrapping around workpiece
  • Material adhesion to tools
  • Burr formation
  • Surface tearing if tool dull

準備開始加工了嗎?

上傳圖面或 CAD 檔案,即可取得報價。

免費取得報價