CNC Milling for Copper C110 (ETP Copper)

CNC milling copper is challenging due to its softness and tendency to produce long, stringy chips. Sharp tooling and appropriate chip-breaking strategies are essential for successful results.

建議加工參數

參數數值
可達公差±0.02 mm (±0.0008")
表面光潔度Ra 0.4-1.6 μm
切削速度100-300 m/min (SFM 330-1000)
進給速率0.05-0.15 mm/tooth
刀具建議Carbide with sharp edges, 2-3 flutes. PCD tools for best finish. Avoid TiAlN coatings (copper affinity).

專家加工技巧

1

Use very sharp tools with positive rake

2

High feed rates help with chip breaking

3

Consider chip-breaking geometry end mills

4

Avoid rubbing — maintain constant chip load

5

Use compressed air or mist coolant

常見加工零件

Bus bars

Heat exchanger plates

Electrode components

RF cavities

Cooling channel blocks

加工挑戰

  • Long stringy chips wrap around tools
  • Material adhesion to cutting edges
  • Burr formation on exits
  • Soft material deforms easily

準備開始加工了嗎?

上傳圖面或 CAD 檔案,即可取得報價。

免費取得報價