Rapid Prototyping for Copper C110 (ETP Copper)
Copper rapid prototyping is used for thermal and electrical validation where conductivity testing requires the actual production material.
建議加工參數
| 參數 | 數值 |
|---|---|
| 可達公差 | ±0.02 mm |
| 表面光潔度 | Ra 0.8-1.6 μm |
| 切削速度 | 100-300 m/min |
| 進給速率 | 0.05-0.15 mm/tooth |
| 刀具建議 | Sharp uncoated carbide or PCD. |
專家加工技巧
1
Sharp tooling essential for good finish
2
Challenging to machine — allow extra lead time
3
Specify if high-purity C101 is needed vs standard C110
常見加工零件
Heat sink prototypes
Bus bar validation
Electrical contact prototypes
加工挑戰
- Gummy material — surface finish may need extra passes
- Tarnishes quickly — may need protective coating