Rapid Prototyping for Copper C110 (ETP Copper)

Copper rapid prototyping is used for thermal and electrical validation where conductivity testing requires the actual production material.

推奨加工パラメータ

パラメータ値
達成可能な公差±0.02 mm
表面粗さRa 0.8-1.6 μm
切削速度100-300 m/min
送り速度0.05-0.15 mm/tooth
工具推奨Sharp uncoated carbide or PCD.

専門家の加工ヒント

1

Sharp tooling essential for good finish

2

Challenging to machine — allow extra lead time

3

Specify if high-purity C101 is needed vs standard C110

一般的な製造部品

Heat sink prototypes

Bus bar validation

Electrical contact prototypes

加工の課題

  • Gummy material — surface finish may need extra passes
  • Tarnishes quickly — may need protective coating

加工を始める準備はできましたか?

図面またはCADファイルをアップロードして、お見積もりをご依頼ください。

無料見積もりを取得