Rapid Prototyping for Stainless Steel 304

Rapid prototyping in 304 stainless provides production-representative parts for food, medical, and chemical applications where material properties must be validated.

推奨加工パラメータ

パラメータ値
達成可能な公差±0.02 mm (prototype standard)
表面粗さRa 1.6-3.2 μm
切削速度50-100 m/min
送り速度0.05-0.10 mm/tooth
工具推奨Standard carbide with TiAlN coating.

専門家の加工ヒント

1

Allow extra lead time vs aluminum (2-3x longer machining)

2

Specify 304L for welded assemblies

3

Standard tolerances unless critical dimensions identified

一般的な製造部品

Food equipment prototypes

Medical device validation

Chemical vessel test parts

加工の課題

  • Longer lead time than aluminum
  • Higher machining cost
  • Surface finish may not match production (polished/electropolished)

加工を始める準備はできましたか?

図面またはCADファイルをアップロードして、お見積もりをご依頼ください。

無料見積もりを取得