Wire EDM for Stainless Steel 304
Wire EDM of 304 stainless is an excellent alternative to milling for complex profiles, as EDM is unaffected by work-hardening. The material cuts predictably with good surface finish.
推奨加工パラメータ
| パラメータ | 値 |
|---|---|
| 達成可能な公差 | ±0.02 mm |
| 表面粗さ | Ra 0.2-0.8 μm |
| 切削速度 | Moderate — lower conductivity than aluminum |
| 送り速度 | Auto-tuned by EDM controller |
| 工具推奨 | Brass wire 0.20-0.25mm. Coated wire for faster roughing. |
専門家の加工ヒント
1
No work-hardening concern with EDM
2
Multiple skim cuts for mirror finish
3
Deionized water dielectric standard
4
Good choice for intricate medical device features
一般的な製造部品
Medical device profiles
Surgical instrument features
Complex valve seats
Stencils and screens
加工の課題
- Slower than aluminum due to lower conductivity
- Recast layer may affect corrosion resistance