Wire EDM for Aluminum 7075-T6
Wire EDM is used for 7075 aluminum when complex profiles, sharp internal corners, or features beyond milling capability are needed. The high zinc content machines well with EDM.
推奨加工パラメータ
| パラメータ | 値 |
|---|---|
| 達成可能な公差 | ±0.02 mm |
| 表面粗さ | Ra 0.4-1.0 μm |
| 切削速度 | Fast — high conductivity |
| 送り速度 | Auto-tuned by EDM controller |
| 工具推奨 | Brass wire 0.20-0.25mm. Zinc-coated wire for speed. |
専門家の加工ヒント
1
Similar parameters to 6061
2
Multiple skim passes for aerospace tolerances
3
Adequate flushing pressure
4
Deburr recast layer for fatigue-critical parts
一般的な製造部品
Aerospace profiles
Slot features
Complex contours
Precision shims
加工の課題
- Recast layer must be removed for fatigue-critical aerospace parts
- Stress relief recommended after EDM