Rapid Prototyping for Aluminum 7075-T6
When prototypes must match production strength levels, 7075 provides representative mechanical properties while maintaining fast machining for rapid turnaround.
推奨加工パラメータ
| パラメータ | 値 |
|---|---|
| 達成可能な公差 | ±0.02 mm (±0.0008") |
| 表面粗さ | Ra 1.6-3.2 μm |
| 切削速度 | 150-350 m/min |
| 送り速度 | 0.05-0.12 mm/tooth |
| 工具推奨 | Standard carbide end mills. |
専門家の加工ヒント
1
Specify when strength testing is planned
2
Note: 7075 cannot be welded — design accordingly
3
Use standard T6 temper for immediate availability
一般的な製造部品
Strength test articles
Aerospace design validation
Load-bearing prototype brackets
加工の課題
- Higher cost than 6061
- Not weldable — assembly must use fasteners